The CS7 is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson’s proprietary network platform, the CS7 employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the loudspeaker are controlled and monitored through Adamson’s proprietary AI software.

Acoustically, the CS7 contains 2x 7-inch Kevlar® Neodymium transducers and a 3” compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 100°x 12.5° (H x V). The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the farfield. Adamson’s Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection. Please refer to the CS7 User Manual for further information.

Frequency Range (+/-3 dB) 80 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 100° x 12.5°
Maximum Peak SPL** 138 dB
Components LF 2x ND7-LM16 7” Kevlar® Neodymium Driver
Components HF Adamson NH3 3” Diaphragm / 1.4” Exit Compression Driver

Slidelock Rigging System

Connection Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR
Height Front (mm / in) 203 / 8
Height Back (mm / in) 122 / 4.8
Width (mm / in) 527 / 20.75
Depth (mm / in) 411 / 16.2
Weight (kg / lbs) 17.5 / 38.6
Amplification 2 channel Class-D, 2400 W total output
Input Voltage 100 - 240 V
Current Draw at 230 V 0.45 A rms idle, 1.6 A rms long-term, 9 A max peak
Supported Processing Onboard / Proprietary
CS7 Ultra-Compact Support Frame (930-0025) Support frame for CS7, S7, CS118 & S118 enclosures
CS7 Ultra-Compact Line Array Micro Frame (930-0027) Frame for up to 8x CS7 or S7 enclosures
CS7 Ultra-Compact Pole Mount Adaptor Frame (930-0034) Pole mount adaptor for CS7 or S7
CS7 Extended Beam (930-0021) Accommodates greater array articulation
CS7 Moving Point Extended Beam (930-0033) Extension beam with continuously adjustable pick point
CS7 Line Array H-Clamp (932-0047) Horizontal articulator clamp to be used with CS-Series/S-Series/IS-Series line array rigging frames (max load: 200 kg)
CS7 Extended Lifting Plates (932-0043) Lifting plates with fine resolution pick points for single point hangs (2 per set)
CS7 Ultra-Compact Line Array Dolly (938-0022) Transports up to 4x CS7 or S7 enclosures
CS7 Ultra-Compact Line Array Cover 4up (907-0031) Cover for 4x CS7 or S7 stacked on an Ultra-Compact Dolly (part no. 938-0022)
CS7 Ultra-Compact Line Array Flight Case Single 3up (901-0004) Flight Case for 3x CS7 or S7 stacked on an Ultra-Compact Line Array Dolly (part no. 938-0022)
CS7 Ultra-Compact Line Array Flight Case Single 4up (901-0005) Flight Case for 4x CS7 or S7 stacked on an Ultra-Compact Line Array Dolly (part no. 938-0022)
CS7 Ultra-Compact Line Array Flight Case Double 4up (901-0006) Upright case for 2 sets of 4x CS7 or S7 on 2 Ultra-Compact Line Array Dollies (part no. 938-0022, purchased separately)
CS7 Spec Sheet One page spec sheet for the CS7 n/a
CS7 User Manual Comprehensive User Manual for the CS7 n/a
CS-Series Brochure Product brochure for Adamson's CS-Series n/a
ADAMSON EASE Data V17 Complete GLL library for all Adamson products n/a


Get in Touch